Golden Bell Inc.
1728 State Rt. 161
Centralia, IL 62801
Ph. (618)-532-8073      Cell (618)-780-4949


Disc Chisels


Back                 Home                              Model DC-9S                             Contact Us 

The  DC - 9S   disc chisel is a 9 shank unit designed with the growing farmer in mind.  This machine can be converted to an 11 or 13 shank unit with bolt on wings and hardware, eliminating the need to trade for a bigger machine.





The high clearence and wide spacing of the shanks allows plenty of room for the trash to pass through without plugging.   Shanks are on 15" centers but mounted on 3 separate tubes, shanks have a 30" radius from their closest partner.  This is especially important during wet feild or high trash conditions.   All shanks are 32" in height, another plus.   The walking are another good feature, all Golden Bell disc chisels come with walking tandem axles as standard equipment thus eliminating wheel hop at any speed.   Walking tandems are controlled by rephasing cylinders for a uniform working depth from side to side.

The 22" dia. front coulters help cut through trash in wet conditions and are spring supported with hydraulic adjustment.  Gang bolts that the blades ride on are 1 3/4" dia. and coupled with regreasable pillow block bearings.  Wheels on the walking tandems are mounted a large distance from each other to give a uniform working depth and keep the mud build up down.  The models  DC - 11S  eleven shank and   DC - 13S  thirteen shank are built identical to   DC - 9S   that is shown in these pictures.  The difference being the 11 and 13 shank models have full lenght bolt on wings that attach to each side along with colter extensions which include an extra bearing and support spring for each side.